Butterfly Valve

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS  6392 Table 17 and IS 1538.

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Double Acting Pneumatic Actuator Operated.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center stopper for both open and closed position.
• Scotch Yoke Technology as the most suitable mechanism for valve and damper operation, producing higher torque at both end positions.
• Actuator is without  Rack and Pinion for smooth operation and longer life.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 153

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538

Product Details:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Electrical Acuator Operated.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center stopper for both open and closed position.
• Compliant with B.M.S (Building Management System).
• Can be provided with extended wire for ease of installation.
• IP 67 protection available for outdoor application.
• Inbuilt micro switch position feedback.
• Input Voltage – 24/230 V power supply.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.